Well, things are hetting up in Steorn. Something sure is going on in the Dublin HQ: we in the inner forum or OS have, as have the '300' other NDA engineers, been told some details of the release event(s) planned for the next few months. Contrary to what one bible-thumping member of the 300 has written in his blog, though, Sean McCarthy can in no way be compared to Jesus in terms of messianic mission. I mean, I had a Guinness with Sean a few times and I assure you he is a decent human being with a great sense of humour and decency. Now maybe Jesus acted similarly now and then, but there the resemblance ends I would say.
Yes, this technology is only a few weeks away from exploding on the world stage. Already hundreds of forum members know how to build this device. So the knowledge is widespread. I don't think it's outside my NDA to say that this distributed knowledge will play a role in the roll-out of the technology. In 2010 the replications will start to sprout up all over the place, and the slow work of convincing the sceptics will begin. Though probably people like Randi and Ash will still not believe, even when they are driving an Orbo-mobile and phoning with an Orbo-phone.
Roll on Roll-out!
posted by blogtrotter | 4:38 AM
22 Comments:
So you are saying that the release is imminent? And convincing?
Has the Steorn team published any calorimetry results? This, after all, is the correct way to examine claims of energy production.
Have they published any control experiments, like comparing the power needed to drive the device both WITH and WITHOUT the magnets installed?
And finally, have they shown a self-running device?
Is the answer to the above questions "NO"?
--TinselKoala
Oh well.. now I think my post was too melodramatic.. :)
http://crasexmachina.blogspot.com/
Just remember.. Steorn wern't able to show the jury anything that convinced them they had "free energy".
The "Jury" thing was the other way around, they didn't see anything because Steorn didn't show them. There's a difference, rather than implying that there was no free energy or a lack of evidence, but that they were refused access to the technology.
Has the 300 club been broken into two sections, the knows and the know nothings? Or are you part of a superior inner circle that is privvy to new information? As we know the 300 have not seen anything resembling OU yet.
Why bash Nolanchart's faith because he posted the truth about Steorn?
Oh yes, release is indeed fairly imminent. Sean has said so in open interviews and we have seen things that strengthen that impression. And the demo and release process will answer any questions about the reality of the effect. Especially when it#s reproduced all over the place.
Round and round and round they go
and stop they not the Rabbit knows.
That's good. So if the men in black get to Steorn or Steorn disapears on 1st January there's 300 people with the knowledge anyway. I look forward to the coming weeks.
I wonder if the excuse is going to be along the lines of "Steorn's folded but our NDA's are still binding! We know the truth but we can't reveal it!"
No - if Steorn folded utterly I'm sure we'd be allowed to leak out the info. That's unlikely though, as we are having more and more proof that perparations are ongoing intensively for the December demo.
The release is imminent again? Haven't you noticed that's ALWAYS the case with these guys?
The Steorn team is already at the venu, setting up the demo of Orbo 1.0, which about 50 of us will start to reproduce after Xmas. By end Dec 2009 you will see the live webcam of the spinner. Hee hee reminds of my favourite Morrisey song 'spring-heeled Jim': " so many women, his head should be spinning". Well, look out for spring-heeled Sean!
With the forthcoming Climate Change Summit in Copenhagen, we will see a major gathering of world leaders to discuss carbon emission targets. Politicians like the limelight, and I can just see Obama, Brown, and the rest of the mob being upstaged by Steorn.
After three years of following this thing I often find you (Hugh) are one of the few genuinely reasonable Steorn supporters. If this is truly about to happen then I would like to thank you for being so. I can’t say I've always agreed with you but you’ve always at least made the effort to make sense. More than I can say for most…
Thanks - I appreciate that. Let's hope the Demo, to open in so few days now, will be a big success, or if not that part 2 in Jan 2010 will clinch it. I enjoy watching all the TV specials on climate change and CO2 and Copenhagen these days and imaging how many of the predictions are false as Steorn OU will blow the old world apart and start anew.
As the consciousness evolves, people must see the truth when it stares them in the face. Thus, I must bring to your attention that the Global Warming hoax is a fraud...Just Search engine "Climategate"
I have viewed several Orbo demos. The system operates using outside energy (a battery). It also appears that the system may be creating some energy as a result of an interaction between the rotation of the magnets and the coils. The system is also capable of supporting pickup coils in order to create outside energy however, not without an energy loss to the system itself. If in fact, the system is indeed operating at an efficiency level of 327% as claimed, the following should apply:
1. You should be able to remove the input current and the motor should run continuously.
2. Or, if you use a rechargeable battery, the pickup coils could be used to recharge the battery and the system should run for an indefinite period of time without any outside energy input, barring component failure. The battery should remain charged at 100% if indeed the system is operating at the claimed efficiency level.
It is difficult to accept that Orbo is incapable of operating under it’s own power, given the claim that Orbo is 327% efficient. If indeed the system is operating that efficient, it is hard to believe that the devise has an energy loss of 227% due to heat, bearing contact friction and air resistance. I believe the Orbo System may have been modified to operate using the pickup coils in order to recharge the battery and Steorn had a system melt down when the rotor ceased operation. It appears to me that Orbo may only be a high efficiency rotor motor. Motors are quite efficient now days however, there is always room for improvement. I have been following Steorn (Orbo) for several years now. One BIG question remains. If the Orbo device is so efficient that there is absolutely a gain of energy during operation, why wasn’t something done within the last 2-3 years to capture the energy and prove that the device could indeed run under it’s own power. Heat energy can always be captured and converted to mechanical energy and then ultimately to electrical energy. However, there will always be energy loss to the environment during this process. In order to have Perpetual Motion, there must be ABSOLUTELY NO outside energy source connected to the system and the device must run under it’s own power and at least “overcome friction” during operation. I am convinced that Perpetual Motion can be accomplished however, the Orbo System has failed to prove that it has accomplished this endeavor.
M.J. Cote’
02/02/2010
Sorry Cote - you haven't a clue. I was at the demo and we spoke with Sean and Seamus afterwards. This battery thing is an old canard. Seamus said that capacitors or direct leads would indeed work, but would produce a very irregular current - only a battery delivers a steady, fixed level of current, which you need to show zero CEMF - hard to compare 2 jagged lines.
Next - you didn't look at the video obviously. The most convincing part is where the oscilloscope shows power in and power out. The Pout is indeed about 3 times Pin - hence the 300%. But as Sean said, you can make it as efficient as you want. He showed that by moving the PU coil closer to the rotor - Pout then shot up and gain went to 600%! Pin stayed the same - how so? Well, the rotor slowed down. But that slowing doesn't affect Pin!
Wake up there and open your eyes. Luckily, the demo wasn;t for the common public like you, as Sean said. It was for professionals like me and developers. Get a life - get orbo!
I stand by my comments. The Orbo Device has not proven energy creation nor has it proven that it can at least run under it's own power without an outside energy connection. That is the bottom line... I am sorry, but that is a fact...
Below is the Orbo Jury's Verdict.
The jury’s chairman, R.I. MacDonald, professor emeritus of electrical engineering at the University of Alberta, announced the jury’s public release including the following statement: "The unanimous verdict of the Jury is that Steorn's attempts to demonstrate the claim have not shown the production of energy. The jury is therefore ceasing work." MacDonald subsequently stated on the jury's web site that "The announcement says what the jury has to say. There will be no further information from the jury about the Steorn technology for contractual reasons.”
Below is a link relating to the above article outlining the Jury's findings.
http://eng.ohmynews.com/articleview/article_view.asp?article_class=4&no=385391&rel_no=1
M.J. Cote'
02/04/2010
And I stand by my comment. The convincing part is over now with the last demo. It's down to developers applying the tech. Luddites who can't move with the times will be left at the wayside while the first wave of developers cleans up.
Steorn will deal with the Jury in good time - their action was despicable as they hadn't the patience to wait a few months for the release. Now all their questions could have been answered. Today the first scientist was at WW testing with his own equipment - if you don't like their approach, put your instruments where your mouth is and get in there and test yourself. Could be a jurist will be amongst those to test in Feb.
Thank you for the invite however, the ultimate test has failed. Needless to say, there is lots to be done. Perpetual motion will not be realized if someone doesn't get it right. Keep the faith... God Bless... Nothing is impossible with God...
"Yes, this technology is only a few weeks away from exploding on the world stage.
...
In 2010 the replications will start to sprout up all over the place"
My calendar is asking me when the Orbo will be revealed as a scam.
Post a Comment
<< Home